Best T1 DEAL Networking Questions Fastest Internet

Posts Tagged ‘static’

It’s really a pain in the arse having to restart the DHCP everytime I sign on.

Please be as specific as possible, as I’m not real proud of my PC knowledge.

CCA 3.0 allows to configure static NAT mappings for the WAN connection that is configured with a static IP address or PPPoE negotiated IP address. To navigate to the Static NAT mappings in the feature bar, choose Configure then Security then NAT .

so i need to have a static ip on my home network for port forwarding….so i setup the tcp/ip to do so, and it worked great.

then i got to school, and it wouldn’t connect…i realized it was the static ip, so i changed the tcp/ip config to “obtain ip address automatically”….and it works

whats lame is that in the tcp/ip config, there are radio buttons for the dynamic and static…lets say you put values in the static, then click the radio button for the dynamic, even though the static is disabled, it deletes all the values for the static.

so i get to school, disable the static…then when i get home, i have to manually re-enter the ip, mask, gateway and dns servers….this is a pain, and should not be….

is there anyway to have both these configs setup to work without manually re-entering the static info every time i get home?

can it be done with multiple profiles? i have a dell insprion E1505 laptop, which uses intel PROSet/wireless to connect to both my home and school
FYI, i have not played around with different profiles and setting, because i just have not had the time, and can’t afford to waste time fiddling around. What better way to save time then to ask an expert who has had success.

Thanks
FYI, i have not played around with different profiles and setting, because i just have not had the time, and can’t afford to waste time fiddling around. What better way to save time then to ask an expert who has had success.

Thanks

How do I set a static IP (and disable DHCP) on a windows seven wireless network?

Hi all, I am new in networking field. I have windows 2003 server with DHCP server configured which supports 254 workstations. Now I have to assign internet 200 users more .Please suggest me
Thanks John, but I am confuse where i will use these subnet mask with ip address? If you are saying in win server 2003 then please describe me how?

so i need to have a static ip on my home network for port forwarding….so i setup the tcp/ip to do so, and it worked great.

then i got to school, and it wouldn’t connect…i realized it was the static ip, so i changed the tcp/ip config to “obtain ip address automatically”….and it works

whats lame is that in the tcp/ip config, there are radio buttons for the dynamic and static…lets say you put values in the static, then click the radio button for the dynamic, even though the static is disabled, it deletes all the values for the static.

so i get to school, disable the static…then when i get home, i have to manually re-enter the ip, mask, gateway and dns servers….this is a pain, and should not be….

is there anyway to have both these configs setup to work without manually re-entering the static info every time i get home?

can it be done with multiple profiles? i have a dell insprion E1505 laptop, which uses intel PROSet/wireless to connect to both my home and school

Most networks use DHCP servers and dynamic IP addressing. If your network uses static IP addressing, what information will you need to know? Thanks.

-Modem Only (Disable Internet Sharing). At the moment I use PPPoA I was using PPPoE before, but my wireless router failed to connect with every other devices at home such as my Laptop, phone and wii. By the way, I’m using internet for home purposes.

I’m trying to make my wireless router act as only access point, and I was told to turn off NAT, DHCP and give it a static IP. I have already disabled DHCP but I need to know how to turn off NAT and what to do to get a static IP working. Thanks.

How should you configure a computer so that it will use the static IP address when at home without interfering with the DHCP service when working at the office?

Previously I detailed this simple process on the mac. Now, in my first Windows 7 tutorial. I show you how to do it on Windows too.

I have signed up for a block of static IP addresses but cannot access them. I have a Linksys Router access my DSL modem via PPPoE and I get back 75.55.5.6 as my router address. This works fine. The router is set up for my static addresses. I have 3 or more computers that I assigned Static Addresses from 75.55.5.1 to 75.55.5.2 to etc… 75.55.5.5. All of these computers have Internet connectivity. So far so good. But here is the problem. I can’t ping 75.55.5.1 to 75.55.5.5 from the outside world. What I need to do is have another computer send a Special protocol DataGram to one of these computers on its static address. I want to use ports 1234 and 1235. But from the outside internet access, they do not route to my computers. I can only ping 75.55.5.6. So what is wrong? How do I communicate with these computers?

Thanks,

OK, i am trying to set up a cable router and now its asking if i hav estatic ip, dhcp, or pppoe. I have comcast internet so which one do I choose? Please help meeee

My house has 50 static IPs for each computer. I want to change that so each router has one static IP and have each user now DHCP. I heard that it is possible. How would i change it from 50 static to only one or two with the actual users now using DHCP. Thanks for the help.

hi,everyone,i got some ADSL config problems, so i hope your guys could help me.
what i try to do is to point my static ip address to my web home page,I’ve try to change ADSL setting,
enable MAC Spoofing to my host computer MAC;
point NAPT to my host computer ip address;
set my Virtual Server port to 80,and point to my host IP address,
enable bridge filtering,fill with WAN MAC and Lan MAC;
and i also change HTTP server port to other port as 81;
and somehow i can’t enable Bridge at WAN config,and i can’t choice Encapsulation as PPPoe LLC, becasue if i doing so,then, the whole internet don’t work;
IIS service is work on the LAN,when i try Lan ip address,it’s correct point to my local homepage,but what i need not this,i need point my static ip to my local homepage.
so,if anyone who is expert or know how to point static ip address to home page,could you please give me a hand,thank you very much.
Merrry Christmas and Happy New Year to everyone.

I must help link three sites so video calls can be initated by anyone in the company, not just the “tech savvy.” If using DHCP will a call be more difficult to set up? Or will the Polycom device’s MAC address provide enough information to rout the call?

Would static IP be simpler? What about cost of static vs. DHCP?

Thanks in advance for you answers!