Best T1 DEAL Networking Questions Fastest Internet

Posts Tagged ‘signal’

This is subject to adding any antenna available in order to get the maximum output distance.

I have a router on the bottom floor and a computer on the second floor with a wireless adapter that gets the wireless signal, however, I have devices that should be in the same room as the computer that connect to the internet through Ethernet. How would I convert the wireless signal my computer gets with the adapter to an ethernet connection? For example, somehow bridge the wireless adapter and NIC card then just plug the device into the ethernet port on the computer, or buy some sort of device that does it?

I hardly know about internet and i am about to start a wireless connection. I want it for my house (not company etc). I have found one modem-router (Netgear DGN2000 Wireless Modem Router Annex A (270Mbps)) but will it have a strong signal that will cover the whole apartment without problems? Any help would be appreciated…or any other suggestions about modem routers etc…

Thank you!

I need it to be a consistent signal. Right now I have several AP and Wireless routers with the DHCP disabled covering the land but I must disconnect and reconnect once I go out of range of one of the routers or AP. All these devices get their IP address es from the main router.

I have a brand new wireless N router and although all of my computers are wireless G they still pick it up. Sometimes; however, the connection to the network disappears on all of the computers in the house simultaneously. What could be causing this?

My modem is in my basement with my desktop. I am looking for a good router that would be able to penetrate to the upstairs so that I can use my notebook? Any suggestions would be greatly appreciated.

We are facing the problem to receive the satellite signals since Zain telecommunication have installed there boasters in various areas of Bahrain. Please advise to get rid of that situation? Many TV program are not working because of that.

I didn’t subscribe for the phone service,but only for the adsl connection

I want the router to reach my neighbors’ house so we can share the costly high-speed internet. I live in a rural area. There are no other wireless routers in the area to interfere with the signal. I have a direct view of their house from a window where the router could be placed. the only thing between our houses is a single line of trees and about 700 ft of open space. I would also like to have a fast put through as well. The internet speed we’re getting is 6 Mbps from Comcast, if that matters. High-speed just became available in my area so I’m new at this, but I’m pretty up on techy stuff and I would like to set it up myself if you think it would be manageable. Thanks for the help!

Our apt. complex is going completely wireless but I still need an ethernet cable for xbox and such. I am wondering what type of router i need to buy and how to set it up so that this is possible. I can give the admins a mac address to use the router as a access point. Also, they mentioned something about DDWRT but i am clueless on how to go about that.

thanks

I also have another router that I could use if a wireless bridge is easier and more effective. The connection is poor from the back house, but I can still play.
I have a second router. Does anyone know how I could connect these two so I could get wireless reception from both areas?

I have a flat screen television mounted on a wall with a CAT5-e cable and a 16-2 wire running to the equipment closet where i want the signal of the remote to end up.

Can someone link me the equipment that i need in order to send the infrared signal over the cable that i have already in the wall to the equipment closet?

In the closet there is a Satellite receiver and a DVD player both needing to be controlled remotely.

I didn’t subscribe for the phone service,but only for the adsl connection

I work at a radio station, and we’re moving our phone system over to VoIP.

However, we need to turn the digital feed coming from our Cisco 7960′s into an analogue feed [normal phone line cable] so that we can plug it into our Telephone Balance Unit / Hybrid, so we can put the calls to air.

However I haven’t found a device that can do this, any ideas?

I get my internet stream from my free city wireless provider. The stream enters my computer through a linksys network adapter with three antennas and an amplifier built in. It feeds an internal card. It works really well and I’d like to continue using it, but I want to send it to other computers in my apartment via wireless connection.

I want to use an ethernet card in an adjacent slot to feed a router that will transmit wireless signal across my apartment. For some reason the router will not install when attached to the output of the ethernet card. Should I just use a cross-over cable? Normally you run a ethernet cable from the wall to the router, to all of the computers, but I don’t have this ‘wall jack’ feature in my apartment.

Much obliged.

I am trying to reposition the wireless router in my house to increase the signal strength through out the house. I have been told by some people to put the router downstairs because the signal goes up and others have told me to put the router upstairs because the signal projected down mostly.

please explain…………..

Im planning on purchasing a router because of new computers and a ps3 and i was just wondering whether a router splits the signal with my excruciatingly slow 256 kbps bandwidth speed on both ends or does it halve it. So if i had two computers using the internet at the same time would i have 256 kbps on both computers or roughly 128 kbps on each?

I didn’t subscribe for the phone service,but only for the adsl connection