Best T1 DEAL Networking Questions Fastest Internet

Posts Tagged ‘setting’

The main network is using a router wired through the building,

in one room I connected my DI-624 wireless router to the wall – and two computers wired to the router, one wireless to the router. This worked fine for internet, but I couldn’t access the main network (just computers attached to the DI-624 network).

So I disabled DHCP (turning the router into a switch I guess). Works great, all computers (even wireless – after some tweaking) connect to both the internet and main network.

BUT, now I cannot get to the DI-624 CONFIGURATION. I have tried all sorts of IP addresses, looked at the default gateway (tried that address), just can’t get back to it?

I’m in not stressing too much because it works, but I can’t change any settings anymore?

I just bought a Linksys Wireless Router. I’m trying to set up my network so that my desktop, laptop, Xbox 360, and Nintendo Wii can all go on the internet. Is there anything I should be aware of before starting to setup the router? Are there any tips for setting up the router?

This demonstration was made with Outlook 2007. wonderful-wordpress-websites.com

Step-by-step guide o how to set up your imap/pop3 email accounts within Outlook 2010.

Setting Up Outlook Express (Vista Mail) with IMAP

Instructions 1. Open Microsoft Outlook 2003, and select Tools and then Email Accounts from the menu bar 2. In the E-mail Account Setup Wizard, choose Add a new e-mail account, then click Next 3. For Server Type’, select the option IMAP and then click Next 4. Under User Information, type in your full name into the Your Name field 5. Enter your UGA email address into the E-Mail Address” field 6. Beneath the Server Information heading, fill in both the incoming mail server and outgoing mail server with pod51004.outlook.com 7. For User Name, underneath Logon Information, enter your UGA email address, and for Password, enter your MyID password 8. Click on the More Settings button. 9. Select the Outgoing Server tab and place checks next to the options, My outgoing server (SMTP) requires authentication and Use same settings as my incoming mail server 10. Click on the Advanced tab. 11. Place checkmarks next to This server requires an encrypted connection (SSL)” for both the incoming and outgoing server. 12. Under Incoming Server, enter the port number 993 13. Under Outgoing Server, enter the port number 587 14. Press OK to close this window. 15. Click Next, then Finish to complete and close the setup wizard.

Instructions 1. Open Mac Mail from your applications folder or launcher. 2. In the menu bar, click on Mail and then Preferences. 3. Click on the Accounts tab. 4. Click on the + button at the bottom left corner of the preferences window. 5. For Your Name, enter your full name. 6. In the Email Address field, enter your full UGA email address (myid@uga.edu). 7. Your MyID password should be entered under Password. Click Continue. 8. In the Account Type pulldown menu, choose IMAP. For description, enter a personal name for this account (eg My UGAMail). 9. For Incoming Mail Server, type in: pod51004.outlook.com 10. Under Username, enter your full UGA email address once again, and your MyID password under Password. Click continue, and Mail will verify the connection settings. 11. In the Outgoing Mail Server window, enter another personal name for this account (eg UGAMail Send Mail) 12. For Outgoing Server, type in: pod51004.outlook.com * If you want to send using this server for all of your accounts, place a checkmark next to Use Only This Server. 13. Place a check next to Use Authentication, and click Continue. 14. Finally, click on Create to complete the account setup. Close out any account settings windows still open, and your mail will begin downloading.

Instructions 1. Open Entourage 2008 from the Applications folder. * If this is your first time using Entourage, you will encounter the Account Setup Assistant window. * If not, go to the menu bar and click on Tools and then Accounts… 2. In the Accounts window, click on the New button. 3. In the Edit Account window, next to Account Name, enter a name for this account (ie Joe’s Email). 4. Enter your first and last name under the Name field. 5. Type in your UGA email address in the E-Mail Address field. 6. Under Account ID, type in your full UGA email address. 7. For IMAP Server, enter the following: pod51004.outlook.com 8. Enter your MyID password in the Password field. 9. Click on the button labeled, Click Here for Advanced Receiving Options. 10. Place a checkmark next to This IMAP Service requires a secure connection (SSL), and another next to Override Default IMAP Port. It should default to 993. 11. Click on the small square in the upper left hand cover of this pop-up to close the window. 12. Underneath SMTP Server, enter the following in the Server Name field: pod51004.outlook.com 13. Click on the Click Here for Advanced Sending Options button. 14. Place a checkmark next to SMTP Service Requires Secure Connection (SSL) and next to Override Default SMTP Port. 15. In the field next to this, enter the port number 587. Place another checkmark next to SMTP server requires authentication and select the option, Use the same settings as receiving mail server. 16. Click on the …

I have a belkin n wireless router model F5D8236 and wanted to set up a wireless network from my ethernet port. I know that it is possible, because other people in the dorm have set up ones in their rooms, but I am not having any luck. I have tried logging into the router and enabling it as an access point, but no matter what i do, when I try to connect to the network i create with it, the connection times out!

more info: my school network requires a name and password to go online, but when I set up a pppoe instead of dynamic, it says it is no longer connected to the internet! also, whenever I change the router’s ip when setting it up as an access point, i can’t connect to the router through this new IP, I always end up having to reset the whole device and start over. I know that there are several websites out there that say they can remedy this problem, but It never helps! I follow everything step by step, and nothing works.

which of the following protocols should i configure at the workstations used on the network for internet access?

TCPIP, SPX, OSPF, RIP?

Setup Gmail on Nokia N95 and fetch/send email over Wi-Fi using HandyWi(www.handywi.com)

i have Verizon dsl, and i am trying to set up a ASUS wl-520gu router. I have a westell 327w modem.

ok, so i used the cd, and tried to set it up. I used EZ setup. it said that the installation was successful. however, the internet wont work, for both LAN and wireless. i plugged everything in right i think. when i went to 192.168.1.1, it saids:

type: PPPoE
status: disconnected
reason: Cable is not attached

yes i used PPPoE

PLEASE DONT ANSWER WITH A ANSWER THAT WONT HELP ME; SUCH AS “i dont know, but i have the same problem”, OR SOME OTHER USELESS ANSWER. ITS VERY ANNOYING. THANK YOU. BUT GIVING SUGGESTIONS AND IDEAS ARE GOOD.

PLEASE ANSWER. ILL GIVE THE BEST ANSWER TO SOMEONE WHO ACTUALLY HELPED ME.
i have Verizon dsl, and i am trying to set up a ASUS wl-520gu router. I have a westell 327w modem.

ok, so i used the cd, and tried to set it up. I used EZ setup. it said that the installation was successful. however, the internet wont work, for both LAN and wireless, however the wireless does detect it. i plugged everything in right i think. when i went to 192.168.1.1, it saids:

type: PPPoE
status: disconnected
reason: Cable is not attached

yes i used PPPoE

PLEASE DONT ANSWER WITH A ANSWER THAT WONT HELP ME; SUCH AS “i dont know, but i have the same problem”, OR SOME OTHER USELESS ANSWER. ITS VERY ANNOYING. THANK YOU. BUT GIVING SUGGESTIONS AND IDEAS ARE GOOD.

PLEASE ANSWER. ILL GIVE THE BEST ANSWER TO SOMEONE WHO ACTUALLY HELPED ME.
THE WIRELESS DOES DETECT THE ROUTER THOUGH

Step-by-Step guide on how to set-up email on your Nokia 6120 classic connected to Telstra. To add an email account, like Hotmail or BigPond, just follow these simple steps.

Read: In this video, I show you how to setup PAM security to prevent SSH users to login as root, as well as test it. I also show you how to change the SSH port and add it to the iptables rules (OPTIONAL!). Also note, anything I do in this, it may be deemed as non-secure in some ways. Well, I’m perfectly aware of that. I’m just showing how to do specific things. Security is the next step, and can be read up on. Thank you, Shane. (The written version is being revised to reflect /etc/sysctl.conf changes) If you want a truly secure SSH ability, you may want to read this as a reference… fedorasolved.org . I do not cover this. Notes: If you use debian or anything debian based, I cannot and will not help you. Do not ask for help on those distributions. Especially ubuntu. Prerequisits: -You followed the first two videos -DHCP and IPTABLES concepts understood and completed on your server You can follow along completely if you use these distributions: –Fedora –CentOS Commands to note: vi — It’s an editor in linux. i for insert, o for a new line, shift+g to go to the end of the file, ESC for command mode. :wq saves your file (zz does too). nano — Another editor in linux, much easier to use. pico –Alternative to nano if not available. services name restart –name being the name of the service ssh –Secure Shell. Allows a machine to remotely access another with encryption. useradd –Adds a user passwd –Changes the password for a user (if typed without a username, it changes …

I’m setting up a netgear router and it is asking for my PPPoE details?
The only problem is i have no idea what that is? How Do I find out

what is my pop or imap settings? need it to setup mobile access to my yahoo account

utorrent speed up tweak setting, here is the setting, i can download 7gb drama/series 25 episode in 95 hours. try it, happy download

OK, i am trying to set up a cable router and now its asking if i hav estatic ip, dhcp, or pppoe. I have comcast internet so which one do I choose? Please help meeee