Best T1 DEAL Networking Questions Fastest Internet

Posts Tagged ‘making’

I wasted 6 8CPC (rj-45) jacks already. I know I am doing it right. White orange, orange, white green, blue, white blue, green, white brown, brown. And I am placing it correctly in the jack from left to right (facing it from the bottom of the jack). But it doesn’t work! I don’t have a cable tester because I don’t see the point just to tell you that your SOL since you still have to start all over again if one copper string didn’t make the cut.

But Im thinking in the back of my head now, “is it a 568A?” But on the cable it says 568 CAT5E. And isn’t CAT5E consider an 568B? So, I think I have everything right so far.

Do you think its because when i take off the jacket i could have accidently cut one of the copper wires on accident, like one small microscopic scratch?

Also, i found all this cable in a dumpster behind a school. Do you think they probably ran the whole left-over cable with some destruct mechanism so no one else is able to use the cable?

Thanks for your help.

Rosie O’Donnell talks to Represent’s teen writers about how her personal mentor helped her prepare for her role in “America.” For more info about Represent magazine and to read true stories by teens in care go to www.youthcomm.org

I was trying to learn how to make a network cable but was told that there is 3 different way to layout wires straight-thru 568A, straight-thru 568B, and crossover. What are each ones different? what they do?

Another question: what is the different between cat5,cat5e, and cat6. What do each do and their difference?

I added a couple of CAT5 hubs in my house and wired them using the -B configuration and made my own cable using the same -B configuration. They are not working. Why?

I added a couple of CAT5 hubs in my house and wired them using the -B configuration and made my own cable using the same -B configuration. They are not working. Why?

Hi. I am trying to figure out how to make a 1:16 multiplexer for a 1:2 multi and 2 1:8s. I understand we have 2 data lines and a selector, but I can’t figure out for the life of me how to tie them together. Any help is appreciated.
Wait, wouldn’t i just set up the to 8×1′s and have their outputs as incoming data lines into the 2×1?

Im gonna become good at c++ and networking and scripting beore I move onto making graphical games. I been reading som tutorials on winsock but its so damn complicated.. im slowly getting hang of it though. but I wonder still how do i implement it into the game later..

I dont want to start programming my game before I know for sure, Do i have to design the code a certain way to implement the networking later?
Do you use winsock code almost everywhere in the source for everything possible (eating, attacking, moving) because then I shouldnt really start programming the game before I gotten the hang of winsock?

Rosie O’Donnell talks to Represent’s teen writers about how her personal mentor helped her prepare for her role in “America.” For more info about Represent magazine and to read true stories by teens in care go to www.youthcomm.org

Windows server2003. I need to rebuild active directory on the DHCP Server1 while I make the second DHCP server the Operational Master

I’m making rail & stile raised panel doors, and have been using a home-made router table. The router table’s parts don’t fit together with the precision that I think is required for doing this kind of work (although I am admittedly quite inexperienced…some of the problems might not be due to the router table ), and I’m wondering if I could & should buy a really good router table (for a reasonable price, of course), or if it makes more sense to try to modify or re-make my home-made router table.

Nah i really don’t want your opinion cuz 9/10 all of you will say… “dude dell’s better” or “get alienware” or “get mac” or “get hp” or “get gateway” and i HATE THEM ALL… so im getting this nice and descent gaming computer…. now check it out…

My current computer’s shi**y specs…

Manufacturer:
Dell Computer Corporation
Processor:
Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory:
1278MB RAM
Hard Drive:
76 GB
Video Card:
NVIDIA GeForce FX 5200
Monitor:
Default Monitor
Sound Card:
SoundMAX Digital Audio
Speakers/Headphones:
Keyboard:
USB Root Hub
Mouse:
USB Root Hub
Mouse Surface:
Operating System:
Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Motherboard:
Computer Case:

—————————————————-

Now here is the computer i will be getting for christmas… sweetness.

Brand iBUYPOWER
Model Gamer Power 900X
Recommended Usage Gaming
Form Factor Tower
Processor Intel Core 2 Quad Q6600(2.4GHz)
Processor Main Features 64 bit Quad-Core Processor
Cache Per Processor 2 x 4MB L2 Cache
Memory 4GB DDR2 800
Hard Drive 320GB SATAII
Optical Drive 1 20X DL DVD+/-RW Drive
Graphics NVIDIA GeForce 8400GS 512MB
Audio Realtek ALC888 codec, High definition Audio
Ethernet Realtek 8111C (10/100/1000 Mbps)
Keyboard Logitech Deluxe Keyboard
Mouse Logitech Optical Mouse
Operating System Windows Vista Home Premium 64-bit
Software Included MS Office 2007 [60-Day Trial]
Special Features iBUYPOWER Vantage Gaming Tower with HALO2 graphic + Blue Lighting
Motherboard
Chipset Intel G31
CPU
CPU Type Core 2 Quad
Installed Qty 1
CPU FSB 1066MHz
CPU Speed Q6600(2.40GHz)
L2 Cache Per CPU 2 x 4MB
CPU Socket Type LGA 775
CPU Main Features 64 bit Quad-Core Processor
Graphics
GPU/VPU Type NVIDIA GeForce 8400 GS
Graphics Interface PCI Express x16
Memory
Memory Capacity 4GB DDR2
Memory Speed DDR2 800
Form Factor DIMM 240-pin
Memory Spec 2GB x 2
Memory Slots (Available/Total) 0/2
Maximum Memory Supported 4GB
Hard Drive
HD Capacity 320GB
HD Interface SATA II
Optical Drive
Optical Drive Type DVD±RW
Optical Drive Spec 20X DL DVD+/-RW Drive
Audio
Audio Chipset Integrated
Communications
LAN Chipset Integrated
LAN Speed 10/100/1000Mbps
Front Panel Ports
Front USB 2
Front IEEE 1394 1
Front Audio Ports 2
Back Panel Ports
COM 1
LPT 1
PS/2 2
Rear USB 4
RJ45 1 port
Rear Audio Ports 3 ports
Expansion
External Bays 4 x external 5.25″ drive bays
2 x external 3.5″ driver bays
Internal Bays 4 x internal 3.5″ driver bays
PCI Slots (Available/Total) 1 x PCI-Express x16
1 x PCI-Express x1
2 x PCI
Physical Spec
Dimensions 20.5″ x 17.75″ x 8.0″
Weight 30 lbs.
Manufacturer Warranty
Parts 1 year limited
Labor 1 year limited

http://www.newegg.com/Product/Product.aspx?Item=N82E16883227121

————————

Now to some of you… that looks kinda garbage… but to me that’s like an unrealistic upgrade… and im not gonna build my own computer yet… im gonna build my own computer later on for college and shit… so yeah. but what do you guys think? any suggestions on what i should buy with it to enhance performance?

it doesnt come with a monitor so anyone know any good monitors i could buy? flatscreen

In an NGN network what are the important points should be considered when making integration between any two different vendors for example (Cisco and Alcatel-Lucent) ?

www.website.ws www.website.ws Your own .WS “WebSite” Domain Name: A domain name is simply an address on the Internet. Rather than having to remember a difficult series of IP (Internet Protocol) numbers, by which computers know which individual web site is located where, (for example, 208.212.155.9), you can just type in a textual address, such as www.YourDomain.ws or www.binaincome.ws/ws.html 1000′s of .ws domains are registered everyday, so secure yours before someone else takes it forever! Professionally Designed Web Templates: The WebSiteBuilder 4.01 is the framework for your WebSite. Professionally designed by graphic artists, these templates give you the foundation for building your WebSite. You can create as many pages as you want for your site. There is no programming or complicated coding, simply follow the easy-to-use instructions to create a dynamic and professional WebSite! You can create your site quickly, then make changes if you’d like, or you can spend several hours creating the perfect site for you. You can view your WebSite before you publish it for the world to see. You also have 24/7 access to your WebSite’s control panel and can make changes at any time and as often as you like! You can also view the changes before you publish them to the world. Custom Email Addresses – 10 (ten) Included per Domain: WebMail: Our WebMail allows you to use your own domain name as your email address and you can access your email through your account from any Internet …

This is the extended edition of my iMap for my Screen Cultures course. That’s why there are so many references to film stuff. The feature film will be made soon…

How to make a yahoo cracker using vb programing language their is link in here to download the video And one for the source to the program, but you should be able to read everything in the video anyways.here is this download link. rapidshare.com rapidshare.com (( VB Source)

Client Windows XP and Windows 2003 Server w/ DHCP reserving an IP address for XP client

I have a Virgin Media cable connection that has been providing a broadband connection to my home network of 6 PCs. I have recently added a BT ADSL connection that also could provide the broadband connection via a BT Home Hub. I would like to use both WAN connections and load balance them.
A number of designs have been proposed, but all require either detailed configuration of the routing tables (under Windows XP) on each PC or configuration of teh tables on each of the routers (Belkin and Home Hub).
A dual WAN router has also been suggested. It is not clear to me how this would be configured. Do I take a LAN connection of the Belkin router to the WAN port on the Dual Wan router? Will this also work with the Home Hub? I don’t want to use the WiFi capabilities available on each of the existing routers.
Correction … I don’t want to LOOSE the WiFi capabilities of each of the existing routers.