Best T1 DEAL Networking Questions Fastest Internet

Posts Tagged ‘failed’

I solved my problem by doing the steps from the following link. www.battlefieldheroes.com If you want to know if you have the problem I had realy fast, you can try to load this page profile.ea.com . If you can, you don’t have my problem. If you can’t load this, then you have the problem I had and I would suggest on clicking on the link to the bfh forum and follow the instrucions !!!!!If this isn’t the problem, you might just want to have a look at your firewalls. Lower them a little. When you’re on a router put your IP on DMZ,.. Since the Battlefield Heroes forum seems to go down sometimes, I quote here the post that I posted a link of. “I found that in my case the Error 1002 Unable to Connect was caused by an incompatibility between the EA server software and a new feature in Windows Vista called “Explicit Congestion Notification”, or ECN. It’s not on by default in Vista, but some Internet Optimizer software turns it on. I think this same feature also exists in Windows XP with the newest updates and Windows 7. To see if you are affected and if the steps below are likely to help, try to access the following link: profile.ea.com I was unable to pull up this page in any web browser, it just gave a connection timed out error. After trying this fix, I am now able to load this site and can connect to the game! My Specs Windows Vista 64-bit Ultimate SP2, all advanced network features turned on. I am using the Windows Vista built-in firewall. I had previously tried disabling …

My girlfriend’s Toshiba laptop has WIndows Vista Home Premium.
She turned it on yesterday and a driver install thing randomly popped up.
She didn’t know what it was and neither did I so she hit NO when it said to install.
After that she was no longer able to connect to the internet.

When you hover over the wireless icon it says “Connection status: unknown The Dependency service or group failed to start.

I have tried numerous fixes and none have worked.

Under the NETWORK ADAPTERS in the device manager all have the triangle/exclamation mark.
When I right click and hit properties it says “This device is not working properly because Windows cannot load the drivers required for this device (Code 31).

When I go to Computer Management and Services I right click DCHP client and it says
“Windows could not start the DHCP Client service on Local Computer”
Error 1079 the account specified for this service is different form the account specified for the other services running in the same process.

When I try to start Network Location Awareness.
It says Windows could not sart the Network Location Awareness on Local Computer.
Specific error code 1073741288.

I’ve tried the “netsh winsock reset catalog” fix in command prompt run as administrator and reset.
This still did not fix the problem.

I thought it might be a firewall problem however when I try to change any firewall settings it says that Windows Cannot Start Firewall Service.

She is the administrator on the laptop.

We don’t have the disk the laptop came with and might not for a week or so.
Does ANYONE know how to fix this?

Thanks in advance for trying.

“Trying to log in to the IMAP server has failed, please make sure the username and password are correct. If you continue, you may not be able to receive mail.” What is the username/password combination I have to type in? Where do I get it from? PLEASE HELP. I already looked at the apple page and it didn’t help!
oh that explains it. does making a .mac account cost anything?

ok like i plugged my ethernet cable up to my router and it said i couldn,t connect, so i went to test connection and i did. so when it got there it said the connection was wired but when it went to IP address it failed. so i went to edit settings and it showed my IP address and then i went to additional settings and i had no PPPOE user name, where do i get one?

Running WinXP-SP2
Only showing up with 1394 connection – no local area connection (not sure if there was one before, but I would think so) Problem just occurred today, worked fine saturday (last time used).

Tried system restore to an earlier date – didn’t work

Tried netsh winsock reset (fix from different website)
didn’t work

Any help greatly appreciated!

Shannon
Checked Device manager – only thing listed under network cards is 1394 net adapter
Expanded to show hidden devices now lists

Direct parallel
NVIDIA n Force Networking Controller – Packet Scheduler Miniport
WAN Miniport (ATW)
WAN Minport (IP)
WAN Miniport (IP) Pocket Scheduler Minport
Wan Miniport (L2TP)
Wan Miniport (PPOE)
Wan Minport (PPTP)

cable not connected. But all the cables are connected. The company trying to set me up is GoodTelCom out of Korea using their cp-100 phone. I need this set up for a job and the company I am working for only uses this company for their VOIP so I cann’t change providers. Any help would be appriciated.

Please Help. I already tried the unplugging it for 30 seconds crap.

I turned on my computer and it was abnormally slow turning on… It was on the welcome screen for like 4 minutes, then black. I then could not get on the internet and tried to click a program and this came up: WSAStartup() failed, or you have the incorrect version of WinSock installed. I do not know what to do. I am on Vista Home Basic and have a Toshiba Satellite laptop. Thanks if you can help.