Best T1 DEAL Networking Questions Fastest Internet

Posts Tagged ‘Dynamic’

I need help to configure both Bit Torrent or UTorrent.
Thanks a lot

My Ethernet camera gets a Public IP from the ISP which can be directed with Dyn DNS, but What happen when this Public IP changes? Can I automaticaly get the new IP and see it from the mentioned DNS?

i want my home network to have static ips. i disabled the DHCP server. however, even the in the tcp/ip settings i’ve chosen in another computer that connects to my router wirelessly, “i’ve selected obtain ip address automatically”, i am still able to access the internet.!
WHY?????

so i need to have a static ip on my home network for port forwarding….so i setup the tcp/ip to do so, and it worked great.

then i got to school, and it wouldn’t connect…i realized it was the static ip, so i changed the tcp/ip config to “obtain ip address automatically”….and it works

whats lame is that in the tcp/ip config, there are radio buttons for the dynamic and static…lets say you put values in the static, then click the radio button for the dynamic, even though the static is disabled, it deletes all the values for the static.

so i get to school, disable the static…then when i get home, i have to manually re-enter the ip, mask, gateway and dns servers….this is a pain, and should not be….

is there anyway to have both these configs setup to work without manually re-entering the static info every time i get home?

can it be done with multiple profiles? i have a dell insprion E1505 laptop, which uses intel PROSet/wireless to connect to both my home and school
FYI, i have not played around with different profiles and setting, because i just have not had the time, and can’t afford to waste time fiddling around. What better way to save time then to ask an expert who has had success.

Thanks
FYI, i have not played around with different profiles and setting, because i just have not had the time, and can’t afford to waste time fiddling around. What better way to save time then to ask an expert who has had success.

Thanks

Some VPN devices don’t have a problem with this, but the Cisco ASA device seems to demand that a fixed IP address be associated with a VPN endpoint. I need to VPN to two locations whose IPs may change, but they use a dynamic DNS service to map a static FQDN to their current IP address. I can’t figure out how to get the Cisco to use that FQDN (office1.mydomain.com, e.g.) instead of an IP address. Cisco appears to support this via some kind of “dynamic map” but I cannot figure out how to make it work. Any help or configuration examples would be much appreciated.

so i need to have a static ip on my home network for port forwarding….so i setup the tcp/ip to do so, and it worked great.

then i got to school, and it wouldn’t connect…i realized it was the static ip, so i changed the tcp/ip config to “obtain ip address automatically”….and it works

whats lame is that in the tcp/ip config, there are radio buttons for the dynamic and static…lets say you put values in the static, then click the radio button for the dynamic, even though the static is disabled, it deletes all the values for the static.

so i get to school, disable the static…then when i get home, i have to manually re-enter the ip, mask, gateway and dns servers….this is a pain, and should not be….

is there anyway to have both these configs setup to work without manually re-entering the static info every time i get home?

can it be done with multiple profiles? i have a dell insprion E1505 laptop, which uses intel PROSet/wireless to connect to both my home and school

Dhcp Enabled Yes
Auto configuration Enabled Yes

I;ve read that if these two are “yes” i have a dynamic ip address, i also use wireless and i’ve tried to unplug and replug my router and the ipconfig/release and renew tactic but neither of them change it.

Does this mean i have a static ip address or is there a problem?

i dont know how this works but looking at the list i can see my computer and my bros computer and then i see two mac address as well….what is going on here? is someone using my bandwith, heres what it looks like.

baldwin-1860034 (mine)
janahan-PC (bros)
and the under it didn’t show any names but it was blank, however i see two mac addresses there, i want to know if they are mine or not

i’m using a DI-524 router by the way

(DHCP)..is there any differents? whats the use of ARP (via command prompt)? or it wil just add my ip address to the arp table?

This episode is about how installa n Dynamic Host Configuration Protocol (DHCP) in Windows 2008. This DHCP service will assign IP adresses to clients which will try to connect to the server or network. My Blog: micronuck.blogspot.com Info: en.wikipedia.org en.wikipedia.org DHCP: en.wikipedia.org Note : I made this videoblog with a version of Windows presented from the Microsoft Academy Program, I am not making any kind of money out of making this videoblog, and it is ment for educational purposes only! I am using VirtualBox which was created by innotek, later taken over by Sun Microsystems, these days Oracle. The official download link is: www.virtualbox.org

I have a static ip. an ip that is 192.168.1.x (any number can be X)
I wish to have a Dynamic IP, but i don’t know how to go about it.
Can anyone here please help?
I’ve spent countless hours trying to figure it out.

This lesson discusses the details of the Application Layer Protocol Dynamic Host Configuration Protocol (DHCP). This is the protocol that automatically gives you an IP address.

I am trying to set up my Netgear wireless router and it keeps saying that it only detects a static internet connection. I called my internet provider and they said I needed dynamic or automatic. How do I change from Static to Dynamic?? Im so frusterated…its not even funny please someone help and say it so I can understand…thanks

so i need to have a static ip on my home network for port forwarding….so i setup the tcp/ip to do so, and it worked great.

then i got to school, and it wouldn’t connect…i realized it was the static ip, so i changed the tcp/ip config to “obtain ip address automatically”….and it works

whats lame is that in the tcp/ip config, there are radio buttons for the dynamic and static…lets say you put values in the static, then click the radio button for the dynamic, even though the static is disabled, it deletes all the values for the static.

so i get to school, disable the static…then when i get home, i have to manually re-enter the ip, mask, gateway and dns servers….this is a pain, and should not be….

is there anyway to have both these configs setup to work without manually re-entering the static info every time i get home?

can it be done with multiple profiles? i have a dell insprion E1505 laptop, which uses intel PROSet/wireless to connect to both my home and school
FYI, i have not played around with different profiles and setting, because i just have not had the time, and can’t afford to waste time fiddling around. What better way to save time then to ask an expert who has had success.

Thanks
FYI, i have not played around with different profiles and setting, because i just have not had the time, and can’t afford to waste time fiddling around. What better way to save time then to ask an expert who has had success.

Thanks

Will it affect speed or how long it would take to load up my homepage & why is it cheaper than the other 2 (static & dynamic)