Best T1 DEAL Networking Questions Fastest Internet

Posts Tagged ‘Corrupted’

I was doing a system performance rating test and then i got an error. It couldn’t complete the assesment because of an error being reported from operating system or another component. I went to event veiwer, around the same time i got a bunch of Audit Failure’s saying the same thing:

“Code intergrity determined that the image hash if a file is not valid. The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error.

File Name: \Device\HarddiskVolume1\Windows\winsxs\x86_microsoft-windows-tcpip-binaries_31bf3856ad364e35_6.0.6001.18427_none_b30f7c1866701ed5\tcpip.sys”

How do I fix this?

XML veiw:
-
-

*I just realized I had ALOT of misspelled words… Sorry about that.* *Err sorry about the sudden cut out/in to full screen of text I ran over on minues, and I didn’t realized how slow I typed* *used audio swap, no mic, and 9 mins of silence would be cruel* Link. support.microsoft.com Other Tips. KEEP IT SIMPLE. Never have more Protocols on your network adapter then you need. For most: -Microsoft networks -File/print sharing (if you plan on sharing files or printers on that system) -Tcp/IP ver. 4 ~Personal Choices: QoS packets Tcp/IP Ver. 6, You should NOT need it unless your computer happens to directly be plugged into the Internet Bridge that would benefit from it. Other then that It is a Wasted protocol unless you are running an highly complex internal Network. “Be sure that DHCP and DNS Client services are Automatic and running on the computer, along with (wired/Wireless – Depending on your adapters) auto config. To stop any problems ahead of time.“ Be AWARE of ANY server software or services that might be running on the computer. Some Server software can cause problems. **Important** —Using this method will RESET all settings on network adaptors to DEFAULT. —a. Meaning all Installed protocols on network drivers before the method will be activated on every Network interface —b. Any custom IP, Gateway, DNS, WINS, LMSHOST Lookup, TcpIP Filters WILL BE DEFAULT SETTINGS, You have to input any custom information again. —c. ANY NETWORK ADAPTOR THAT IS USB TO A …

Hello,

I recently bought a set of SMC Gigabit NIC and installed into both of my PC. Both PC are running Windows XP and the latest NIC driver. The cable is Cat6 and that SMC card support auto cross-cable.

Here is the problem I facing:
- When using 1Gbps speed, i copy a file from one to another. After that, i failed to use that file because of corrupted.
- I tried change the speed to 100Mbps and copy the same file again and it works.

So i decided to check on the files I copied. I wrote a program using VB that compare both files byte to byte. And i get difference in around 100MB. (The file was 400MB)
I would like to know is there any problem with Windows XP using gigabit ethernet? or is there any other cause?

Thanks.
*Sorry for my English.
Forgot to mentioned. I am using P2P. So, no switch or hub used.

Hello,
I connect to the internet through lynksys wireless router. I currenlty have signal. But when I click on Internet Explore I can’t connect to the internet. Here is my diagnostic:

Last diagnostic run time: 11/13/09 15:37:29 Gateway Diagnostic
Gateway

info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list:
info This computer has the following default gateway entry(ies): 0.0.0.0
warn There is no default gateway entry
action Automated repair: Reset network connection
action Disabling the network adapter
action Enabling the network adapter
info Network adapter successfully enabled
info This computer has the following default gateway entry(ies): 0.0.0.0
warn There is no default gateway entry
info Redirecting user to support call

IP Layer Diagnostic
Corrupted IP routing table

warn The default route is missing or invalid
Invalid ARP cache entries

action The ARP cache has been flushed

IP Configuration Diagnostic
Invalid IP address

info Valid IP address detected: 192.168.0.1

Wireless Diagnostic
Wireless – Service disabled

Wireless – User SSID

action User input required: Specify network name or SSID
Wireless – First time setup

info The Wireless Network name (SSID) to which the user would like to connect = linksys.
Wireless – Radio off

info Valid IP address detected: 192.168.0.1
Wireless – Out of range

Wireless – Hardware issue

Wireless – Novice user

Wireless – Ad-hoc network

Wireless – Less preferred

Wireless – 802.1x enabled

Wireless – Configuration mismatch

Wireless – Low SNR

WinSock Diagnostic
WinSock status

info All base service provider entries are present in the Winsock catalog.
info The Winsock Service provider chains are valid.
info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test.
info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test.
info Provider entry RSVP UDP Service Provider passed the loopback communication test.
info Provider entry RSVP TCP Service Provider passed the loopback communication test.
info Connectivity is valid for all Winsock service providers.

Network Adapter Diagnostic
Network location detection

info Using home Internet connection
Network adapter identification

info Network connection: Name=Local Area Connection, Device=Intel(R) PRO/100 VE Network Connection, MediaType=LAN, SubMediaType=LAN
info Network connection: Name=Wireless Network Connection 4, Device=(ZD1211B)IEEE 802.11 b+g USB Adapter #4, MediaType=LAN, SubMediaType=WIRELESS
info Network connection: Name=1394 Connection, Device=1394 Net Adapter, MediaType=LAN, SubMediaType=1394
info Both Ethernet and Wireless connections available, prompting user for selection
action User input required: Select network connection
info Wireless connection selected
Network adapter status

info Network connection status: Connected

HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity

warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved
warn HTTPS: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved
warn FTP (Passive): Error 12007 connecting to ftp.microsoft.com: The server name or address could not be resolved
warn HTTP: Error 12007 connecting to www.hotmail.com: The server name or address could not be resolved
warn HTTPS: Error 12007 connecting to www.passport.net: The server name or address could not be resolved
warn FTP (Active): Error 12007 connecting to ftp.microsoft.com: The server name or address could not be resolved
error Could not make an HTTP connection.
error Could not make an HTTPS connection.
error Could not make an FTP connection