Best T1 DEAL Networking Questions Fastest Internet

Posts Tagged ‘client…’

Video de Cliente liviano usando Thinstation. Hardware: Pentium 200MHz con 168MB, sin disco rigido, sin CD-ROM, placa de video Trident, disquete 3 1/2 y Placa de red. Inicia desde un disquete y se conecta a un server DHCP, se asigna automaticamente una IP y se descarga un linux por TFTP desde el servidor principal. Todo esto gracias a thinstation.sourceforge.net No tires tu Pentium 1, usalo como Thin Client (Cliente liviano)

i dont know how this works but looking at the list i can see my computer and my bros computer and then i see two mac address as well….what is going on here? is someone using my bandwith, heres what it looks like.

baldwin-1860034 (mine)
janahan-PC (bros)
and the under it didn’t show any names but it was blank, however i see two mac addresses there, i want to know if they are mine or not

i’m using a DI-524 router by the way

ok so ya my DHCP client is causeing me problems its making me lose connection to the internet with my computer and others on the network..and i know it is that because when i stop that service the network light stays solid green but when the service is started it blinks constantly so..plz help

I have a Linksys wr54g V.8 router. i have installed the dd-wrt firmware. When i download or play an online game i cant be on for more than 1min or else i loose connection! ( but i can still browse?) the ps2 online does the same… even if i put in like “1000sec” in the box for client release time it messes up…
connection: dsl pppoe connection
router: set to dhcp ( pppoe would not work )

When i check my DHCP client table, not all the computers connected to the wireless router are shown there. It will only be shown if i manually connect my computer to the wireless router. Why is it like this?
its a linkysys wrt54G router

server dhcp range is 192.168.0.0 but after rebooting client pc its showing 172.16.0.0 range.

There seems to be some problems in my setup of a wifi access point, can any of you lend a hand with a conflict that is keeping the receiving end of my network from aquiring addresses via DHCP?

I have a house with cable modem, I attached a router w/dhcp for my home network, the router’s LAN IP is 10.1.10.1.

I then decided to buy a couple of antennas and send the signal to another house of mine about 1/2 mile away. I bought an Alcon AP/Wireless Bridge/Repeater and hooked up a sweet antenna in my first house.

Then I grabbed a different Alcon antenna/AP/wireless bridge/repeater/wireless client for the second house.

I have the first alcon device set to be an Access Point so I can use wifi all around my house. It has a static ip set 10.1.10.66

The ‘receiving’ Alcon is set to be a wireless client, it’s IP is set to 10.1.10.67.

At the second house I have the Alcon connecting to a switch which feeds a few computers. None of these computers can get a DHCP ip address. If I manually assign IP’s in the range that House 1′s router is familiar with then they work no problem. For instance 10.1.10.241 statically set on a pc in home 2 will connect and work on the internet just fine. However when I put it to DHCP, it does the 169.254 IP address, meaning it can’t get one.

I have checked my DHCP router and confirmed that I have enough DHCP client spaces available.

Any ideas out there? You guys have surprised me before with some random requests so I figured I woudl try.

I have a rough network map posted on my website http://thecomputerace.com/cc/wireless.PNG

This video clip presents and explains a simple example for a client server application developed in C#. This video clip was developed as part of the ‘C# Fundamentals’ course available for free at www.abelski.com.

but that mac address is not getting recieved by the dhcp server..
may i know the possible reasons for this?

if i change mac address and request for ip address with new mac , is there any problem getting ip address from dhcp server .

would some one please help me in this

My PS3 connects to my router and everything is working normally but for some reason i can’t see the PS3 on my DHCP client list on my router. My computer and laptop are however displayed. Why isn’t my PS3 on the list?

My PS3 connects to my router and everything is working normally but for some reason i can’t see the PS3 on my DHCP client list on my router. My computer and laptop are however displayed. Why isn’t my PS3 on the list?

I have tried using Versamail. It seems slow. Are there others that are decent speed and support folders?

On my Linksys WRT110 Router, the DHCP Client List button is disabled. Why would this be? The DHCP Server is enabled.
Where would this setting be? I am logged into the router as administrator.

what I mean is using any third party utility from a win2k client without physically going to the NT4 server to check out the dhcp reservation

Für Gutefrage.net

The client is a program coded by the programmers.But the server is the ISC DHCP server that comes free with Red Hat Linux-9.The server responds to ISC client,but not to this program.Why?